SV-99026B
Revised 6-05
Catalog Section 55
(00-02-0375)
Diesel-Fuel Shutoff Valves
SV-Series
■
■
■
Solenoid Operated Fuel Shutoff Valve
Diesel Engines
Diesel Driven Pumps and
Compressors
■
■
High Pressure Models
Select from 12 or 24 VDC Models
SV-HP (High Pressure model) Warranty
Description
A limited warranty on materials and workmanship
Orifice: 1/4 in. (6 mm) diameter. See chart below.
The SV-series valve is a normally closed valve that
opens when current is supplied from the battery
through a magnetic switch. Temperature, level, or
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
Maximum Opening Pressure:
60 psi (414 kPa) [4.14 bar].
®
pressure SWICHGAGE instruments installed on
3/16 Orifice
10 20 30
1/4 Orifice
10 15
the engine and pump or compressor, trip the mag-
netic switch, breaking the circuit from the battery
which closes the valve and stops the engine.
Differential
Pressure
1
2
5
1
2
5
How to Order
See the diagram below, example: SV–12–HP
CAUTION: Do NOT use the SV valves with distribu-
Gallons per
Minute
.48 .68 1.1 1.5 2.2 2.6 .72 1.05 1.65 2.35 2.70
2.012.85 4.62 6.3 9.2410.92 3.02 4.416.93 9.87 11.34
The SV-12 valve operates on 12VDC, has a 1/4 NPT
inlet and outlet, and a full 3/16 in. (5 mm) orifice.
24 VDC (SV-24) is optional The SV valves open
against 30 psi. (207 kPa) [2.07 bar] inlet pressure.
tor type injection pumps. For use with DIESEL ONLY.
Liters per
Minute
SV– __ – __ – __
Coil Voltage
12 = 12 VDC
24 = 24 VDC
Dimensions
Greater Flow Rate Valve
Special series SV valve is available with a 1/4 in.
(6 mm) orifice which opens against maximum
pressure of 15 psi (103 kPa) [1.03 bar]. This
valve is recommended where greater flow is
required, and only static head or low transfer
pump pressures are encountered.
2-5/32 in.
(55 mm)
HP = High Pressure
2-11/16 in.
(68 mm)
Orifice
BATTERY GROUND
Blank (non-“HP” models) = 3/16 in. (5mm) dia.
Blank (“HP” models) = 1/4 in. (6 mm) dia.
4 = 1/4 in. (6 mm) dia. (non-“HP” models only)
2-3/16 in.
(56 mm)
High Pressure Valves
SV Repair Parts
SV-HP series valves open against diesel fuel
transfer pump pressure up to 60 psi (414 kPa)
[4.14 bar]. Models are available for 12 or 24 volt
DC systems. The orifice is 1/4 in. (6 mm), using
the same inlet/outlet and options as standard SV.
FLOW
Callouts diagram shown on page 2
Callout
Part Description
Part Number
2-1/8 in.
(54 mm)
A
B
Screw
80-04-1412
3/8 in.
(9 mm)
Brass Body
Coil Replacement Kit
12 volt kit
55-01-0141
55-01-0145
3/8 in.
(9 mm)
Specifications
24 volt kit
11/16 in.
(17 mm)
C
C
D
Core Repair Kit (Std mdls)55-01-0155
Core Repair Kit (HP mdls)55-01-0156
Electrical Rating: 12 VDC, 10 watts
Orifice: 3/16 in. (5 mm) diameter (optional 1/4 in.
3/4 in.
(19 mm)
10-24 NC-2B
2 Mounting Holes
Valve Body: 3/16 Orifice
[6 mm] diameter). See chart above, right.
1/4 NPT x 1/4 NPT(std.) 55-05-0194
Body Connections: 1/4 NPT inlet/outlet
Shipping Weight: 1 lb. 6 oz. (0.68 kg)
Shipping Dimension: 3 x 2-3/4 Sx 2-3/4 in.
D
Valve Body: 1/4 Orifice
Maximum Opening Pressure:
1/4 NPT x 1/4 NPT
55-05-0193
3/16 in. (5 mm) orifice: 30 psi (207 kPa) [2.07 bar]
1/4 in. (6 mm) orifice: 15 psi (103 kPa) [1.03 bar]
(76 x 70 x 70 mm)
SV-99026B page 1 of 2
|
Ricoh Priport Jp5000 User Manual
Samsung Avmkh040ca0 User Manual
Samsung Um18a1c2 User Manual
Sanyo 24kls72 User Manual
Sanyo 26khh72r User Manual
Sanyo Kr 1100ael User Manual
Sharp 66129902992 User Manual
Sharp Mx 4100n User Manual
Silicon Laboratories Toolstick Ek User Manual
Trane Air Conditioner 4ttx5042a1 User Manual