Omega Speaker Systems Thermometer OSXL650 User Manual

Users Guide  
Shop online at  
omega.com  
For latest product manuals:  
omegamanual.info  
TM  
WITH BUILT-IN  
PATENTED  
LASER CIRCLE  
SIGHTING  
OSXL650  
and OSXL653  
Low Cost Professional  
Infrared Thermometer  
 
1-3 Warnings and Cautions  
2
3
3
3
4
6
6
6
7
4-4 Advanced Functions  
7
10  
10  
11  
11  
7.Emissivity Table  
12  
 
Low Cost Professional Infrared Thermometer  
i
NOTES:  
 
Low Cost Professional Infrared Thermometer  
larger than the unit’s optical field of view.  
(OSXL653).  
Patented laser circle sighting.  
Temperature data storge (OSXL653).  
Audible alarms (OSXL653).  
LoDwowCnolosatdPfrroomfeWsswiwon.SaolmIannfuraalrse.cdomTh. AelrlmMoanmuaeltseSrearch And Download.  
1-3 Warnings and Cautions  
CAUTION  
You may receive harmful laser radiation exposure if you  
do not adhere to the warnings listed below:  
• Use of controls or adjustments or performance of  
procedures other than those specified here may  
result in hazardous radiation exposure.  
• Do not look at the laser beam coming out of the  
lens or view directly with optical instruments - eye  
damage can result.  
• Use extreme caution when operating the laser  
sighting.  
• Never point the laser beam at a person.  
• Do not attempt to open the thermometer. There are  
no user serviceable parts.  
• Keep out of the reach of all children.  
Refer to the inside back cover for product warning label.  
Download from WwwL.SoowmaCnousatlsP.croomf.eAslsl iMoannaulaIlsnSfreaarrechdATnhdeDrmowonmloaedte. r  
2
LoDwowCnolosatdPfrroomfeWsswiown.SaolmIannfuraalrse.cdomTh. AelrlmMoanmuaeltseSrearch And Download.  
3
-32 to 538°C (-25 to 1000°F)  
From -32 to -20°C (-25 to -4°F)  
From -20 to 100°C (-4 to 212°F)  
100 to 538°C (-212 to 1000°F)  
to  
0 to 50°C (32 to 212°F)  
10 to 90%RH  
Adj. 0.1 to 1.0 (OSXL653).  
0.95 Fixed (OSXL650).  
YES - Laser Circle  
YES (OSXL653)  
YES  
10 points (OSXL653)  
YES (OSXL653)  
Max//Min/Avg/ T  
Auto-measuring  
Data Storage  
Audible Alarm  
187g Approx.  
 
Low Cost Professional Infrared Thermometer  
4
3.Specifications con’t.  
Laser Sighting  
Wavelength (Color):  
Operating Distance:  
630 to 670 nanometers (red)  
Up to 10 ft.  
Max. Output Optical  
Power:  
<1mW at 75°F ambient  
temperature,  
Class II Laser Product  
European Classification: Class 2, EN60825-1  
FDA Classification:  
Complies with 21 CFR Chapter 1,  
Subchapter J  
Beam Diameter:  
Beam Divergence:  
Laser Configuration:  
Power Switch:  
5 mm  
<2mrad  
Dot and Circle  
Slide switch, ON-OFF  
Laser icon on display  
Supplied by the thermometer  
Power Indicator:  
Power:  
Identification Label:  
Located on the right side of the  
thermometer  
Warning and  
Certification Label:  
Located on the left side of the  
thermometer  
 
5
Low Cost Professional Infrared Thermometer  
LCD displays either the current temperature in degree  
Celsius or Fahrenheit. The unit will HOLD the last  
reading for about 6 seconds after the trigger is  
released; the word HOLD appears. Make sure the  
target area is larger than the field of view of this  
instrument. The laser circle sighting indicates the  
perimeter of the thermometer’s field of view. During  
the measurement session, the display back light  
stays on.  
Laser Circle  
Sighting  
ID and Field  
of View Label  
Optical Lens  
6
Download from WwwL.SoowmaCnousatlsP.croomfe. AsslliMoannaulaIlsnfSreaarrechd ATnhdeDrmowonmloeadte. r  
(OSXL653)  
(OSXL653)  
Complies with 21 CFR, Chapter 1, subchapter J  
Laser Warning and  
Certification Label  
Laser Aperture  
the battery voltage is low  
and battery symbol  
appears.  
LoDwowCnolosatdPfrroomfeWsswiown.SaolmIannfuraalrse.cdomTh. AelrlmMoanmuealtseSrearch And Download.  
7
4-4 Advanced Functions (OSXL653)  
4-4-1 AUTO Mode-Continuous  
Operation  
From the SCAN mode (Trigger is pulled), you can  
lock the trigger electronically and measure  
temperature continuously (AUTO mode) by pressing  
the F key. The AUTO icon will appear on the display.  
Pressing the F key again will disable the AUTO  
mode. AUTO icon will disappear from the display. If  
the trigger is pulled, the unit stays in the SCAN  
mode. If the trigger is released, the unit will go to  
HOLD mode and will shut itself off after about 6  
seconds.  
The following table shows an overall functional flow  
chart of the thermometer:  
Mode  
SCAN  
AUTO  
DATA  
Press F Key  
SCAN AUTO  
AUTO DATA  
Press Up Key  
Press Down Key  
----  
----  
+ Memory  
Location  
----  
----  
- Memory  
Location  
DATA Max Temp  
Max Temp Max Temp Min Temp  
Min Temp Min Temp Avg Temp  
----  
----  
----  
----  
Avg Temp  
∆T  
Avg Temp ∆T  
Emissivity  
----  
----  
----  
----  
T
Emissivity Emissivity High Alarm  
+ Emissivity  
– Emissivity  
HAL  
LAL  
High Alarm Low Alarm + Alarm Set Point – Alarm Set Point  
Low Alarm SCAN/HOLD + Alarm Set Point – Alarm Set Point  
Download from WwwL.SoowmaCnousatlsP.croomfe. AsslliMoannaulaIlsnfSreaarrechdATnhdeDrmowonmloeadte. r  
8
4-4-2 Max, Min, Avg, ∆T Temperatures  
(OSXL653)  
You can review the Maximum, Minimum, Average,  
and differential (Max - Min) temperatures on the  
display by pressing the F key. If the trigger is pulled  
at the same time, the display will show SCAN icon  
and all the values are in real time. If the trigger is  
released, the display will show the HOLD icon and  
all the values are the last readings before the trigger  
is released.  
4-4-3 Temperature Data Storage &  
Recall - DATA Mode (OSXL653)  
You can store up to 10 temperature data points  
(Memory Location 0 thru 9). When you are in DATA  
mode, set the memory location using the Up or  
Down keys, then pull the trigger. The unit will store  
the temperature data in the next memory location.  
You can review (recall) the stored data by going to  
the DATA mode using the F key (Trigger is released)  
and pressing the UP/Down keys. You can then  
review memory locations 0 thru 9.  
NOTE  
The unit stores all temperature data, Emissivity  
value, high and low alarm set points in the  
non-volatile memory, Changing the battery will not  
affect these values.  
 
Low Cost Professional Infrared Thermometer  
9
distance from the target to the target diameter. When  
measuring a target temperature, the target area has  
to be larger than the thermometer field of view  
(FOV).  
1
0
Download from WwwL.SoowmaCnousatlsP.croomf.eAslsl iMoannaulalIsnSfreaarrechdATnhdeDrmowonmloaedte. r  
PATENT NOTICE:  
U.S. PAT. B1 5,368,392; 5,524,984; 5,727,880; 5,823,678;  
5,823,679; 6,123,453; 6,267,500 B1; 6,341,891 B1;  
6,377,400 B1; 6,540,398 B2; 6,614,830 B1; 6,633,434 B2;  
6,659,639; 6,901,089 B1 / Canada 2,114,806; 2,317,734 /  
France 2 756 920; 2 767 921; 2 773 213; 2 773 214 /  
Germany G 94 22 197.9; G 94 22 203.7 / Holland  
1007752; / U.K. Registered 2,237,493; 2,320,324;  
9726133.3 / EPO 0 644,408 B2; EPO 1085 307 A1.  
Other U.S. and Foreign Patents Pending.  
 
Low Cost Professional Infrared Thermometer  
11  
7.Emissivity Table  
Download from WwwL.SoowmaCnousatlsP.croomf.eAslsl iMoannaulalIsnSfreaarrechdATnhdeDrmowonmloaedt.er  
12  
NOTES:  
 
Low Cost Professional Infrared Thermometer  
NOTES:  
 
Low Cost Professional Infrared Thermometer  
WARRANTY/DISCLAIMER  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials  
and workmanship for a period of 13 months from date of purchase. OMEGA’s  
WARRANTY adds an additional one (1) month grace period to the normal one  
(1) year product warranty to cover handling and shipping time. This ensures  
that OMEGA’s customers receive maximum coverage on each product.  
If the unit malfunctions, it must be returned to the factory for evaluation.  
OMEGA’s Customer Service Department will issue an Authorized Return (AR)  
number immediately upon phone or written request. Upon examination by  
OMEGA, if the unit is found to be defective, it will be repaired or replaced at no  
charge. OMEGA’s WARRANTY does not apply to defects resulting from any  
action of the purchaser, including but not limited to mishandling, improper  
interfacing, operation outside of design limits, improper repair, or unauthorized  
modification. This WARRANTY is VOID if the unit shows evidence of having  
been tampered with or shows evidence of having been damaged as a result of  
excessive corrosion; or current, heat, moisture or vibration; improper specifica-  
tion; misapplication; misuse or other operating conditions outside of OMEGA’s  
control. Components in which wear is not warranted, include but are not limited  
to contact points, fuses, and triacs.  
OMEGA is pleased to offer suggestions on the use of its various products.  
However, OMEGA neither assumes responsibility for any omissions or errors  
nor assumes liability for any damages that result from the use of its  
products in accordance with information provided by OMEGA, either verbal  
or written. OMEGA warrants only that the parts manufactured by the  
compamy will be as specified and free of defects. OMEGA MAKES NO  
OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER,  
EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED  
WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.  
LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are  
exclusive, and the total liability of OMEGA with respect to this order,  
whether based on contract, warranty, negligence, indemnification, strict  
liability or otherwise, shall not exceed the purchase price of the component  
upon which liability is based. In no event shall OMEGA be liable for  
consequential, incidental or special damages.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it  
be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any  
nuclear installation or activity; or (2) in medical applications or used on humans.  
Should any Product(s) be used in or with any nuclear installation or activity,  
medical application, used on humans, or misused in any way, OMEGA assumes  
no responsibility as set forth in our basic WARRANTY/ DISCLAIMER language,  
and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless  
from any liability or damage whatsoever arising out of the use of the Product(s) in  
RETURN REQUESTS / INQUIRIES  
Direct all warranty and repair requests/inquiries to the OMEGA Customer  
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,  
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM  
OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID  
PROCESSING DELAYS). The assigned AR number should then be marked on  
the outside of the return package and on any correspondence.  
The purchaser is responsible for shipping charges, freight, insurance and proper  
packaging to prevent breakage in transit.  
FOR WARRANTY RETURNS, please  
FOR NON-WARRANTY REPAIRS,  
have the following information  
consult OMEGA for current repair  
available BEFORE contacting OMEGA: charges. Have the following information  
available BEFORE contacting OMEGA:  
1. Purchase Order number to cover the  
COST of the repair,  
2. Model and serial number of the  
product, and  
3. Repair instructions and/or specific  
problems relative to the product.  
1. Purchase Order number under  
which the product was  
PURCHASED,  
2. Model and serial number of the  
product under warranty, and  
3. Repair instructions and/or specific  
problems relative to the product.  
OMEGA’s policy is to make running changes, not model changes, whenever an  
improvement is possible. This affords our customers the latest in technology  
and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2006 OMEGA ENGINEERING, INC. All rights reserved. This docu-  
ment may not be copied, photocopied, reproduced, translated, or reduced to any  
electronic medium or machine-readable form, in whole or in part, without the  
prior written consent of OMEGA ENGINEERING, INC.  
 
Where Do I Find Everything I Need for  
Process Measurement and Control?  
OMEGA…Of Course!  
Shop online at omega.com  
TEMPERATURE  
ߜ
 
Thermocouple, RTD & Thermistor Probes,  
Connectors, Panels & Assemblies  
Wire: Thermocouple, RTD & Thermistor  
Calibrators & Ice Point References  
Recorders, Controllers & Process Monitors  
Infrared Pyrometers  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
PRESSURE, STRAIN AND FORCE  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Transducers & Strain Gages  
Load Cells & Pressure Gages  
Displacement Transducers  
Instrumentation & Accessories  
FLOW/LEVEL  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Rotameters, Gas Mass Flowmeters & Flow Computers  
Air Velocity Indicators  
Turbine/Paddlewheel Systems  
Totalizers & Batch Controllers  
pH/CONDUCTIVITY  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
pH Electrodes, Testers & Accessories  
Benchtop/Laboratory Meters  
Controllers, Calibrators, Simulators & Pumps  
Industrial pH & Conductivity Equipment  
DATA ACQUISITION  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Data Acquisition & Engineering Software  
Communications-Based Acquisition Systems  
Plug-in Cards for Apple, IBM & Compatibles  
Datalogging Systems  
Recorders, Printers & Plotters  
HEATERS  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Heating Cable  
Cartridge & Strip Heaters  
Immersion & Band Heaters  
Flexible Heaters  
Laboratory Heaters  
ENVIRONMENTAL  
MONITORING AND CONTROL  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Metering & Control Instrumentation  
Refractometers  
Pumps & Tubing  
Air, Soil & Water Monitors  
Industrial Water & Wastewater Treatment  
pH, Conductivity & Dissolved Oxygen Instruments  
M4297/0706  
 

Milwaukee Power Screwdriver 2101 20 User Manual
Napoleon Fireplaces Indoor Fireplace GD80NT User Manual
Nikon Webcam D300s User Manual
Nilfisk Advance America Carpet Cleaner 56315042755 User Manual
Nortel Networks Switch 5625HD User Manual
Onkyo Stereo Receiver TX NR1008 User Manual
Oster Electric Grill 166145 User Manual
Ozaki Worldwide Speaker System HM050 User Manual
Panasonic DVD Recorder DMR E51 User Manual
Paradyne Drums 9128 II User Manual