Omega Speaker Systems Thermometer 0707 User Manual

Input Protection:  
24V dc or 24V ac rms maximum input voltage on any  
combination of input pins.  
Reading Rate: 2.5 time per second.  
INTRODUCTION  
The instrument is a portable digital thermometer that  
measures external thermocouples of type K, J, R, S, T, E,  
N. The thermocouples types comply with the N.I.S.T. –  
ITS 90 standard reference temperature/voltage tables.  
The thermometer features a dual thermocouple input, an  
adjustable T/C offset and an USB interface for uploading  
data to a PC using optional software and cable.  
OMEGAnet® On-Line Service  
omega.com  
Internet e-mail  
HH806U/HH806AU  
MULTILOGGER THERMOMETER  
ENVIRONMENTAL  
Ambient Operating Ranges:  
0°C to 50°C (32°F to 122°F) <80% R.H.  
Storage Temperature:  
Servicing North America:  
M4502/0707  
U.S.A:  
One Omega Drive, Box 4047  
Stamford, CT 06907-0047  
INSTRUCTION  
SHEET  
Shop online at: omega.com e-mail: [email protected]  
For latest product manuals: omegamanual.info  
ISO 9001 Tel: (203) 359-1660  
Certified  
FAX: (203) 359-7700  
-20°C to 60°C (-4°F to 140°F) <70% R.H.  
SAFETY INFORMATION  
Canada:  
976 Bergar  
Laval (Quebec) H7L 5A1, Canada  
Tel: (514) 856-6928  
GENERAL  
WARNING  
FAX: (514) 856-6886  
Display:  
To avoid electrical shock, do not use this instrument  
when working voltages at the measurement surface  
over 24V AC or DC.  
There are three display areas on the HH806 series LCD  
(liquid crystal display). The Main and Second displays  
are 4 ½ digits with a maximum reading of 19999. These  
are used for displaying the value of T1 or T2. The Third  
display is for the date, time, or the differential value of  
T1 to T2.  
For immediate technical or application assistance:  
U.S.A  
and  
Canada:  
Sales Service: 1-800-826-6342/1-800-TC-OMEGA®  
Customer Service: 1-800-622-2378/1-800-622-BEST®  
Engineering Service: 1-800-872-9436/1-800-USA-WHEN®  
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA  
WARNING  
To avoid damage or burns, do not make temperature  
measurement in microwave ovens.  
Overload: “----.-” or “OL” is display.  
Mexico:  
En Espanol: (001) 203-359-7803  
FAX: (001) 203-359-7807 [email protected]  
Battery: 1.5V x 4 PCS (SIZE AAA) UM-4 R03.  
Battery Life: 120 hours typical with carbon zinc battery.  
Dimensions: 160mm(H) x 83mm(W) x 38mm(D).  
Weight: Approx. 365g including batteries.  
Supplied Thermocouple:  
1 meter (40”) type K insulated beaded wire thermocouple.  
Maximum insulation temperature is 482°C (900°F).  
Thermocouple accuracy is ±1.1°C or 0.4% of reading  
(whichever is greater) from 0°C to 1250°C.  
Wire Communication Protocol:  
CAUTION  
Repeated sharp flexing can break the thermocouple  
leads. To prolong lead life, avoid sharp bends in the  
leads, especially near the connector.  
Servicing Europe:  
Benelux: Postbus 8034, 1180 LAAmstelveen, The Netherlands  
Tel: +31 (0)20 3472121 FAX: +31 (0)20 6434643  
Toll Free in Benelux: 0800 0993344  
SPECIFICATIONS  
Czech  
Frystatska 184, 733 01 Karviná, Czech Republic  
Republic: Tel: +420 (0)59 6311899 FAX: +420 (0)59 6311114  
Toll Free: 0800-1-66342 e-mail: [email protected]  
ELECTRICAL  
Temperature Scale: Celsius or Fahrenheit user-selectable  
Measurement Range:  
2400 baud rate. (HH806U)  
19200 baud rate. (HH806A)  
France:  
11, rue Jacques Cartier, 78280 Guyancourt, France  
Tel: +33 (0)1 61 37 2900 FAX: +33 (0)1 30 57 5427  
Toll Free in France: 0800 466 342  
K-TYPE (0.1°) -200°C to 1372°C (-328°F to 2501°F)  
J-TYPE (0.1°) -210°C to 1200°C (-346°F to 2192°F)  
T-TYPE (0.1°) -200°C to 400°C (-328°F to 752°F)  
E-TYPE (0.1°) -210°C to 1000°C (-346°F to 1832°F)  
1
2
External Connections:  
1. USB Port  
2. DC power JACK(12V)  
Germany/ Daimlerstrasse 26, D-75392 Deckenpfronn, Germany  
Austria:  
Tel: + 49 (0)7056 9398-0 FAX: +49 (0)7056 9398-29  
Toll Free in Germany: 0800 639 7678  
R-TYPE (1°)  
S-TYPE (1°)  
0°C to 1767°C (32°F to 3212°F)  
0°C to 1767°C ( 32°F to 3212°F)  
United  
One Omega Drive, River Bend Technology Centre  
N-TYPE (0.1°) -50°C to 1300°C ( -58°F to 2372°F)  
*Based on the ITS-90 temperature standard.  
According to temperature standard ITS-90.  
Accuracy:  
Kingdom: Northbank, Irlam, Manchester  
ISO 9002 M44 5BD United Kingdom  
Certified  
Tel: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622  
Toll Free in United Kingdom: 0800-488-488  
K/J/T/E-TYPE  
±(0.05% rdg + 0.3°C) on -50°C to 1372°C  
±(0.05% rdg + 0.7°C) on -50°C to -210°C  
±(0.05% rdg + 0.6°F) on -58°F to 2501°F  
±(0.05% rdg + 1.4°F) on -58°F to -346°F  
N-TYPE  
±(0.05% rdg + 0.8°C) on -50°C to 0°C  
±(0.05% rdg + 0.4°C) on 0°C to 1300°C  
±(0.05% rdg + 1.6°F) on -58°F to 32°F  
±(0.05% rdg + 0.8°F) on 32°F to 2372°F  
R/S-TYPE  
It is the policy of OMEGA Engineering, Inc. to comply with all  
worldwide safety and EMC/EMI regulations that apply. OMEGA  
is constantly pursuing certification of its products to the  
European New Approach Directives. OMEGA will add the CE  
mark to every appropriate device upon certification.  
The information contained in this document is believed to be  
correct, but OMEGA accepts no liability for any errors it  
contains, and reserves the right to alter specifications without  
notice.  
±(0.05% rdg + 2°C) on 0°C to 1767°C  
±(0.05% rdg + 4°F) on 32°F to 3212°F  
Temperature Coefficient:  
WARNING: These products are not designed for use in, and  
should not be used for, human applications.  
0.1 times the applicable accuracy specification per °C  
from 0°C to 18°C and 28°C to 50°C (32°F to 64°F and  
82°F to122°F).  
 
WARRANTY / DISCLAIMER  
the top-right of the LCD and the previous interval is  
displayed. Press the number buttons printed in white  
on the overlay to change the time interval. Setting is  
from left to right of the following format (HH:MM:SS).  
Press the overlay “ENTER” button to confirm. To exit  
this function, press the ESC button.  
Where Do I Find Everything I Need  
for Process Measurement  
and Control?  
OPERATOR MAINTENANCE  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in  
materials and workmanship for a period of 13 months from date of purchase.  
OMEGA’s WARRANTY adds an additional one (1) month grace period to the  
normal one (1) year product warranty to cover handling and shipping time.  
This ensures that OMEGA’s customers receive maximum coverage on each  
product.  
WARNING  
To avoid possible electrical shock, disconnect the  
thermocouple connectors from the thermometer before  
removing the cover.  
OMEGA…Of Course!  
Shop online at omega.com  
If the unit malfunctions, it must be returned to the factory for evaluation.  
OMEGA’s Customer Service Department will issue an Authorized Return  
(AR) number immediately upon phone or written request. Upon examination  
by OMEGA, if the unit is found to be defective, it will be repaired or replaced  
at no charge. OMEGA’s WARRANTY does not apply to defects resulting  
from any action of the purchaser, including but not limited to mishandling,  
improper interfacing, operation outside of design limits, improper repair, or  
unauthorized modification. This WARRANTY is VOID if the unit shows  
evidence of having been tampered with or shows evidence of having been  
damaged as a result of excessive corrosion; or current, heat, moisture or  
vibration; improper specification; misapplication; misuse or other operating  
conditions outside of OMEGA’s control. Components which wear is not  
warranted, include but are not limited to contact points, fuses, and triacs.  
HH: interval Hour (0~23)  
MM: interval Minute (0~59)  
SS: interval Second (0~59)  
MAX: 23:59:59  
Battery Replacement  
1. Power is supplied by 4pcs 1.5V (AAA SIZE) UM-4  
R03.  
2. The “ ” appears on the LCD display when replace-  
ment is needed. To replace battery remove screw from  
back of meter and lift off the battery cover.  
3. Remove the battery from battery contacts and replace.  
4. When not in use for long periods remove battery.  
5. Do not store in locations with high temperatures, or  
high humidity.  
TEMPERATURE  
Thermocouple, RTD & Thermistor Probes,  
Connectors, Panels & Assemblies  
Wire: Thermocouple, RTD & Thermistor  
Calibrators & Ice Point References  
Recorders, Controllers & Process Monitors  
Infrared Pyrometers  
MIN: 00:00:01  
(8) “APO” Button (Auto power off time setting,  
min. 1 minute)  
Use this function to change the time for the auto power  
off (APO) function. Press the APO button in setup  
mode, and the indicator “APO” and the current time  
will flash on the LCD. The default time for APO is 5  
minutes. Press the number button printed in white on  
the overlay to set the APO time. Press the overlay  
“ENTER” button to confirm. To exit this function  
without changing the setting, press the ESC button.  
MAX: 19999 minutes  
OMEGA is pleased to offer suggestions on the use of its various  
products. However, OMEGA neither assumes responsibility for any  
omissions or errors nor assumes liability for any damages that result  
from the use of its products in accordance with information provided  
by OMEGA, either verbal or written. OMEGA warrants only that the  
parts manufactured by it will be as specified and free of defects.  
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF  
ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF  
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies  
of purchaser set forth herein are exclusive, and the total liability of  
OMEGA with respect to this order, whether based on contract, warranty,  
negligence, indemnification, strict liability or otherwise, shall not  
exceed the purchase price of the component upon which liability is  
based. In no event shall OMEGA be liable for consequential, incidental  
or special damages.  
PRESSURE, STRAIN AND FORCE  
Transducers & Strain Gages  
Load Cells & Pressure Gages  
Displacement Transducers  
Cleaning  
Periodically wipe the case with a damp cloth and deter-  
gent, do not use abrasives or solvents.  
Instrumentation & Accessories  
FLOW/LEVEL  
Rotameters, Gas Mass Flowmeters & Flow  
Computers  
Air Velocity Indicators  
Turbine/Paddlewheel Systems  
Totalizers & Batch Controllers  
*Software Operation manual is in the Software disk.  
MIN: 0001 minutes  
(9) “[OFS]” Button (Thermocouple offset ad-  
just)  
When the main display input is T1 and a thermocouple  
is connected, the instrument can adjust the offset of the  
thermocouple. The same can be done for T2 when on  
the main display. In the setup mode, press this button  
to enter the thermocouple Offset Setup Function (OFS)  
and the indicator CAL should be displayed on the  
top-right of the LCD and the current setting is also  
shown. Press the number buttons printed in white on  
the overlay to change the offset of the thermocouple.  
The resolution of the setup is 0.1°. Press the “-” button  
to set a negative value. Press the overlay “ENTER”  
button to confirm. MAX: ±1999.9 °C/°F.  
(12) “[TIME]” Button (System time setting)  
To set the system time, press the [TIME] button in the  
setup mode. The third display should show the current  
date and time with the year flashing. Enter the new  
value from left to right in the following format  
YY:MM:DD and HH:MM:SS. Press the number but-  
tons printed in white on the overlay to set the system  
date and time. Press the “ENTER” button to confirm.  
Exit this function by pressing ESC button.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor  
shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used  
in or with any nuclear installation or activity; or (2) in medical applications or  
used on humans. Should any Product(s) be used in or with any nuclear  
installation or activity, medical application, used on humans, or misused in  
any way, OMEGA assumes no responsibility as set forth in our basic  
DISCLAIMER language, and, additionally, purchaser will  
indemnify OMEGA and hold OMEGA harmless from any liability or damage  
whatsoever arising out of the use of the Product(s) in such a manner.  
pH/CONDUCTIVITY  
pH Electrodes, Testers & Accessories  
Benchtop/Laboratory Meters  
Controllers, Calibrators, Simulators & Pumps  
Industrial pH & Conductivity Equipment  
WARRANTY  
/
DATA ACQUISITION  
RETURN REQUESTS / INQUIRIES  
Data Acquisition & Engineering Software  
CommunicationsBased Acquisition Systems  
Plugin Cards for Apple, IBM & Compatibles  
Datalogging Systems  
Direct all warranty and repair requests / inquiries to the OMEGA Customer  
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO  
OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)  
NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN  
ORDER TO AVOID PROCESSING DELAYS). The assigned AR number  
should then be marked on the outside of the return package and on any  
correspondence.  
Recorders, Printers & Plotters  
The purchaser is responsible for shipping charges, freight, insurance and  
proper packaging to prevent breakage in transit.  
HEATERS  
Heating Cable  
Cartridge & Strip Heaters  
Immersion & Band Heaters  
Flexible Heaters  
FOR WARRANTY RETURNS,  
please have the following  
information available BEFORE  
contacting OMEGA:  
1. Purchase Order number under  
which the product was  
FOR NON-WARRANTY  
REPAIRS, consult OMEGA for  
current repair charges. Have the  
following information available  
BEFORE contacting OMEGA:  
1. Purchase Order number to cover  
the COST of the repair,  
Laboratory Heaters  
PURCHASED,  
2. Model and serial number of the  
product under warranty, and  
3. Repair instructions and/or specific 3. Repair instructions and/or specific  
problems relative to the product. problems relative to the product.  
2. Model and serial number of the  
product, and  
ENVIRONMENTAL  
MONITORING AND CONTROL  
Metering & Control Instrumentation  
Refractometers  
Pumps & Tubing  
OMEGA’s policy is to make running changes, not model changes, whenever  
an improvement is possible. This affords our customers the latest in tech-  
nology and engineering.  
Air, Soil & Water Monitors  
Industrial Water & Wastewater Treatment  
pH, Conductivity & Dissolved Oxygen  
Instruments  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2007 OMEGA ENGINEERING, INC. All rights reserved. This  
document may not be copied, photocopied, reproduced, translated, or  
reduced to any electronic medium or machine-readable form, in whole or in  
part, without the prior written consent of OMEGA ENGINEERING, INC.  
Made in Taiwan  
 

Multiquip Model Vehicle GX270UT2QA2 9HP User Manual
NetComm Network Router NP720 User Manual
NETGEAR Network Card WNCE2001 User Manual
Nilfisk ALTO Carpet Cleaner 571 User Manual
Nilfisk ALTO Stereo Amplifier ADP102 User Manual
Nokia Cell Phone OT V570 User Manual
Oki Printer C7500 V2 User Manual
Olympus Film Camera OM 2 User Manual
Omega Engineering Satellite Radio LDX 2 User Manual
Panasonic Air Conditioner CS E12DKRW User Manual